SEH 50/18

SEH 50/18 is manufactured from galvanized material in accordance with the EU machinery directives. SEH 50/18 is Category II 3D/0D elevator and comply with the European ATEX directive 94/9EC. It is suitable for most material to be handled in a drying and storage plant.

It is available in three models: 60, 80 & 100. The different models give the following capacities based on grain with 15% moisture content, bulk density 750kg/m3, fed on upgoing leg side and at below specified nominal shaft rpm. Remember that every 1% increase in moisture content above 15%, decreases capacity by 3- 4% . The capacity is affected with the same percentage as the gear box revolution (SK2282-119) changes.

To obtain best capacity and avoid run-stop when feeding grain, it is important to feed the elevator correctly.

Technical info

Capacity t/h6790112
Capacity m³/h89119149
Belt speed m/s3.23.23.2
Buckets/m belt5.47.29.0
Nom. shaft rpm123123123
Product line

H-Line is our product line for daily use, continual operations and year-round production. H-LINE is developed to fulfil the stringent requirements of the grain industry.

Read more about H-Line here